The model was validated by utilizing it for the prediction of the fatigue life of a complex shape part, showing a maximum error equal to 13.7%, in comparison to experimental results.

Moldflow Insight and Ansys CFD CAE program used to verify efficiency and the experiment. To account for the variation of mechanical properties with fiber orientation, Autodesk Moldflow Insight simulations were performed, and the resulting fiber orientations were mapped into Abaqus via the mapping program Autodesk Helius. Injection Molding Technology for Thin Wall Plastic Part - II. moldflow-insight-and-adviser- versions-to-access-free-2014-capa.html. My research major is plastic forming simulation and advanced. Accordingly, two strain-approach-based fatigue models were developed and allowed accounting for the different influence of stress, and strain, concentration on the fracture behavior for static failure, LCF and HCF. Option 1: Download and Install Moldflow 2014 because Design Link is free. Now Moldflow Insight software can simulate the MIM process and predict different common. SEM pictures were also taken on the fracture surface of specimens tested under static, low cycle failure (LCF) and high cycle failure (HCF) conditions, allowing to correlate the cycles to failure with the deformation pattern of the polymer matrix.

Static and fatigue mechanical properties of a polyamide-6 reinforced with a 20% weight fraction of short carbon fibers (PA6-20CF) material were investigated by means of static and fatigue tensile tests on both unnotched and notched specimens.

Moldflow plastic insight 6 1 cracked